Position No. 1683 – Edge bander HOMAG OPTIMAT, type KL 78/A20/S2 with workpiece return system LIGMATECH, type OPTIMAT ZHR 05/L/095
| Machine-No. | 0-200-23-4372 |
| Technical specifications | |
| Working width minimum: | 55 mm with workpiece thickness 22 mm 100 mm with workpiece thickness 60 mm |
| Workpiece thickness | 12-60 mm |
| Workpiece overhang | 30 mm |
| Edge material strips | 0,4 – 20 mm |
| Edge material roll | 0,3 – 3 mm |
| Roll diameter max. | 830 mm |
| Transport chain | 80 mm wide with rubber pad |
| Workpiece support | Scissors version with roller bearing, max. 1000mm extendable |
| Feed | 18 – 24 m/min |
| Pre- installation | for addition workpiece return system ZHR 05 |
| Units : | |
| Pre-Milling Unit (Vertical joint trimming) | 2 x 3 kW; 150 Hz; 9000 rpm for jointing trimming the workpiece edge before gluing Electro-pneumatic control of the motor 1.Workpiece blowoff. |
| Workpiece preheating | for heating the workpiece edge before the glue application |
| Gluing A 20:
| consisting of – Melt adhesive Unit QA34 on melting unit with granulate tank; – Magazine for solid edge strips goods and roll goods Feeding the strip material through vacuum cups Edge monitoring with automatic feed Stop if there is no edge; – Roles separator – Pressure Zone C 1 driven roll press Ø 150 mm 6 after press roll Ø 70 mm Pressure adjustment pneumatically Centric Rail adjustment to different edge thickness |
| Gluing Unit PU 34 | for selective processing of hot melt adhesive or PU |
| Snipping unit HL 83
| chamfer / straight 2 x 0,5 kW; 200 Hz;12000 Upm; |
| Rough Trimming Unit Optimat | 2 x 1,5 kW; 200 Hz;12000 Upm |
| Multi function Unit (Profile Trimming Unit) FK 13
| 2 x0,4 kW; 200 Hz;12000 Upm Automatic 8-station tool changer to edit the edge overhang at the on the workpiece upper- and lower edge and the Milling around the workpiece front – and trailing edge in connection with end trimming and pre-milling unit |
| Universal Trimming Unit Optimat | 1×4 kW,150 Hz, 9000 Upm, Swiveling max. 90 degrees |
| Multi- Clening MN21 | automatic for max. 3 different profiles |
| Wiping device glue joint | Removal of adhesive residue in the region the glue joint |
| Buffing Units | 2x 0,25 kW; top / bottom with oscillation |
| Electrics: | |
| Operating voltage | 380/400 Volt; 50/60 Hz |
| Control voltage | 24 Volt |
| Control – Software: | HOMAG HOMATIC NC 21 |
| Weight ca. | 6000 kg |
| Dimensions approx (L x B x H) | 9300x1400x 1800 mm |
| Location | D-32683 Barntrup |
(Subject to errors, technical modifications and prior sale)