Four moulder with splitting units Weinig, Type: Unimat 23 E, Year: 2004
Working width | 20 -230 mm |
Working height | 10 -120 mm |
Short table | Infeed table 1200 mm with two driven rollers from above |
Drive roller in the machine table | before 1 bottom spindle |
Drive roller in the outfeed table | yes |
Feed motor | 8.6 kW |
Feed rate | 6-36 m / min |
Transport rollers Pointed teeth, condensed roller spacing | |
Inlet system | |
Cross conveyor chains with accelerator | Weinig Type: E6-K |
Working width | 4600 mm |
Foerder off | 1600 mm |
Number of chain conveyors | 7 pieces |
Spindle assembly: | |
1 First lower horizontal spindle | 11 kW, 6000 rpm |
Spindle diameter | 40 mm |
Circle tool | 125-180 mm |
2 First right vertical spindle
| |
Motor | 15 kW, 6000 rpm |
Spindle speed | 6000 rpm |
Spindle diameter | 40 mm |
Circle tool | 112-250 mm |
Max throat depth | 35 mm |
Axial displacement | 80 mm |
3 First left vertical spindle | |
Common motor with motor 1 right vertical spindle | |
Spindle diameter | 40 mm |
Circle tool | 112-200 mm |
Max throat depth | 35 mm |
axial displacement | 80 mm |
4 First upper horizontal spindle | |
Motor | 18,5 kW, 6000 rpm |
Spindle diameter | 40 mm |
Circle tool | 112-250 mm |
Max throat depth | 35 mm |
axial displacement | 45 mm |
5 and 6 Right-left vertical saws spindles | |
Motor | 2 x 37 kW, 4000 rpm |
Spindle diameter | 50 mm |
Tool diameter | 180-350 mm |
Max throat depth | 35 mm |
Displacement axial | 20 mm |
Of spindle | 100 mm |
Spindle resseting with electronic display | CAS System |
Discontinued mechanization
| |
Roll outlet len | 6000 mm |
Roll width | 400 mm |
Roller diameter
| 80 mm |
(Subject to errors, technical modifications and prior sale)