Heavy-Duty automatic pressing line with ring frame downstroking press, front loading Italpresse Typ: MARK / C14-31 / 15
Machine-No.: | 800045 |
Data of Workpieces: | three-layer board |
Alder wood | birch, oak, ash, beech, maple |
Three-layer panels Dimensions gross weight: | 1240 x 1200/1400/1550/2100/2550/3000mm |
Layer A (gross weight) / strips | L-1200/1400/1650/1800/2100/2550/3000mm width 60mm, thickness 5/8 mm /bottom layer |
Layer B (gross weight) / plates | L 505 mm, W 1230 mm, T 6-30 mm, Mid-length |
Layer C (gross weight) / strips | L 1200/1400/1650/1800/2100/2550/3000 mm W 60 mm,T 5/8 mm / upper layer |
Technical data of the press: | |
Steel heating plates | 3100 x 1400 mm, |
Floors opening | 140 mm |
Loading side | 1400 mm |
Specific pressure on 80% the surface |
15 kg/cm² |
Total pressure | 520 Ton |
Assignment of the press | – until lengths 1400 mm, 2 parts in succession, – from 1400 mm, ever upward only 1 part |
Pressure cylinder | 6, ever. ᴓ 200 mm |
Cylinder stroke | 140 mm |
Number of return Cylinders | 2 |
Opereting pressure | max. 280 Bar |
Closing time / opening time about | approx. 3 – 4 sek. |
Time to reach the pressure | approx. 3 sek. |
Press equipped with the following additional equipment | |
Electronic flatness control | |
Automatic switching to pressing speed | |
Unwinding for top film | |
Separate heating circuits for top and bottom heating plate | |
Electrical elimination of a cylinder row | |
Differentiated pressure setting for a cylinder row | |
Horizontal side pressure device: | both sides |
Passage width | 1330 mm |
minute Workpiece width
| 1200 mm |
Total pressure | 20 T |
Pressure cylinder (with pressure rail) | a page 6 St., opposite side 12 St. |
Pressure rail | interchangeable at different workpiece thicknesses |
Inkcl. |
|
Feed belt | 1400×3600 mm, 20 m/min |
Outfeed roller conveyor | 1400×3600 mm, non-drive |
Electric boiler Termo existing with heat exchangers for use of Hot Water on site | Dimensioned for heating plates temperature of about 120 ° C |
1 pcs. heat exchanger | Hot water / thermal oil, |
1 pcs. electric thermal oil heater | |
1 pcs. weeks time switch clock | for programming the switching on of the boiler |
2- component glue mixing plant | Producer Akzo Nobel Casco, Typ 6201-13-001A, |
Plant for the dosing and mixing of liquid Casco-urea, melamine, resorcinol-phenol resin glue and liquid hardener | consisting of: mixing unit, glue pump, glue pump accessories, hardener pump accessories hardener pump, control unit 1 2, level controllers, piping |
Glue cold store | with glue gantry |
Refrigeration unit | |
Glue coating machine | 2 roller |
Roller width | 600mm |
Electric cabinet | The entire control is performed with Programmable System |
Weight | Approx. 20.000 kg |
Operating voltage | 380V, 50 Hz (control 220V) |
Required space (L x B ) | 11000 x 4300 mm |
Location | Stock D-32683 Barntrup / Germany |
(Subject to technical errors/modifications and prior sale)